API 5L Standard Carbon Steel Spiral Welded SSAW Steel Pipe For Oil And Gas Pipe
Spiral submerged arc welding(SSAW) is its forward direction and forming tube centerline hose reel molding angle (adjustable), side molding edge welding and weld them into a spiral.
Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield, strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Mill Test Certificate: EN 10204/3.1B
Third party inspection: SGS, BV, etc.
Advantages of SSAW Steel Pipe
(1) The use of steel strips of the same width enables the production of steel pipes of different diameters, in particular the production of large-diameter steel pipes with narrow strip steel.
(2) Under the same pressure conditions, the ssaw steel pipe are subjected to a smaller stress than the straight seams, which is 75% to 90% of the straight seam welded pipes, and can therefore withstand greater pressures. Compared with the ssaw steel pipe with the same outer diameter, under the same pressure, the wall thickness can be reduced by 10% to 25%.
(3) Accurate size, general diameter tolerance is not more than 0.12%, deflection is less than 1/2000, ellipticity is less than 1%, and sizing and straightening processes are generally omitted.
(4) It can be continuously produced. In theory, it can produce infinitely long steel pipes, and the loss of cutting and cutting tails is small, which can increase the metal utilization rate by 6% to 8%.
(5) Compared with the ssaw steel pipe, its operation is flexible and the adjustment of the replacement type is convenient.
(6) The equipment is light and the initial investment is small. It can be made into a trailer-type flow unit and the ssaw steel pipe can be produced directly at the construction site where the pipeline is laid.
(7) It is easy to realize mechanization and automation.
SSAW Steel Pipe Chemical Components and Machanical Property
| SSAW Steel Pipe Chemical Components and Machanical Property |
| Standard |
Steel Grade |
Chemical Components |
Machanical Property |
| C |
Mn |
P |
S |
Cu |
Ni |
Cr |
Mo |
V |
Tensile Strength (Mpa) |
Yield Strength(Mpa) |
Elongation (Mpa) |
| |
A |
≤0.25 |
≤0.95 |
≤0.05 |
≤0.045 |
≤0.40 |
≤0.40 |
≤0.40 |
≤0.15 |
≤0.08 |
≥330 |
≥205 |
≥29.5 |
| B |
≤0.30 |
≤1.20 |
≤0.05 |
≤0.045 |
≤0.40 |
≤0.40 |
≤0.40 |
≤0.15 |
≤0.08 |
≥415 |
≥240 |
≥29.5 |
| Standard |
Steel Grade |
Chemical Components |
Machanical Property |
| C |
Si |
Mn |
P |
S |
Cu ,Ni |
Cr |
Mo |
V |
Tensile Strength (Mpa) |
Yield Strength(Mpa) |
Elongation (Mpa) |
| |
B |
≤0.30 |
≥0.10 |
0.29-1.06 |
≤0.035 |
≤0.035 |
≤0.40 |
≤0.40 |
≤0.15 |
≤0.08 |
≥415 |
≥240 |
≥30 |
| C |
≤0.35 |
≥0.10 |
0.29-1.06 |
≤0.035 |
≤0.035 |
≤0.40 |
≤0.40 |
≤0.15 |
≤0.08 |
≥485 |
≥275 |
≥30 |
Your message must be between 20-3,000 characters!
