|
Product Details:
|
| Size: | 1/2"-48" | Application: | Gas,Petroleum, Chemical, Power |
|---|---|---|---|
| Port: | Tianjin | Color: | Black |
| Type: | Elbow | Standard: | ASTM |
| Wall Thickness: | SCH10 | Advantage: | Reasonable Price With Excellent Quality |
| High Light: | Petroleum 45 degree pipe fitting,Petroleum 45 degree elbow fitting,SCH10 45 degree elbow fitting |
||
ASTM A106 GRB Black Painted Carbon Steel 45 Degrees Pipe Fittings Elbow
ASTM A106 short radius in accordance with ASTM A106 Carbon steel pipe fittings manufactured to ASTM A106 are usually furnished in the butt-welding form in accordance with ASTM A106 Carbon Steel 90 ° Long Radius Elbow are widely used in different industries like power, engineering, construction and many more.
Chemical Composition (%) of ASTM A106 Pipe Fitting Elbow
| Grade | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V | Nb |
| WPB | 0.3 | 0.29-1.06 | 0.05 | 0.058 | 0.1min | 0.4 | 0.15 | 0.4 | 0.4 | 0.08 | 0.02 |
| WPC | 0.35 | 0.29-1.06 | 0.05 | 0.058 | 0.1min | 0.4 | 0.15 | 0.4 | 0.4 | 0.08 | 0.02 |
| WP11 CL1 | 0.05-0.15 | 0.30-0.60 | 0.03 | 0.03 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 | - | - | - | - |
| WP11 CL2/3 | 0.05-0.20 | 0.30-0.80 | 0.04 | 0.04 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 | - | - | - | - |
Notes:
For each reduction of 0.01% below the specified C maximum, an increase of 0.06% Mn above the specified maximum will be permitted, up to a maximum of 1.35%.
The sum of Cu, Ni, Cr, and Mo shall not exceed 1.00%.
The sum of Cr and Mo shall not exceed 0.32%.
The maximum carbon equivalent (C.E.) shall be 0.50, based on heat analysis and the formula C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15.
| Tensile Requirements | WPB | WPC, WP11CL2 | WP11CL1 | WP11CL3 |
| Tensile Strength, min, ksi[MPa] | 60-85 | 70-95 | 60-85 | 75-100 |
| (0.2% offset or 0.5% extension-under-load) | [415-585] | [485-655] | [415-585] | [520-690] |
| Yield Strength, min, ksi[MPa] | 32 | 40 | 30 | 45 |
| [240] | [275] | [205] | [310] |
Where the wall thickness lies between two values above, the min elongation value is determined by the following equations:
Product Show
Contact Person: Mr. Janson
Tel: 0086-317-5298199
Fax: 86-317-5295979
